Nuvoton announced the latest ML51/ML54/ML56 microcontroller, built-in capacitive touch sensing, LCD driver highly integrated low power platform. Based on 1T 8051 core, running up to 24MHz, the power consumption in normal run mode is 80uA/MHz, lower than 1uA in power down mode the power consumption while power down with LCD on is lower than 20uA. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

1. 說明如何使用 ICP Programming Tool 來對 Nu-Link2-Pro 自身的韌體進行更新。 2. 說明如何使用上電前按下觸發按鍵再上電並拖拉檔案至 Nu-Link2 磁碟機的方式來對 Nu-Link2-Pro 自身的韌體進行更新。 #zh-Hant #Tool #Training #Intermediate #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/nu-link2-pro 聯絡我們：SalesSupport@nuvoton.com

Demonstrate how to use the ICP Programming Tool to generate a programming file, and use the PC to save the firmware to the USB/SD storage device, insert the USB/SD storage device into Nu-Link2-Pro, and then connect the target chip, press the trigger button to complete offline programming. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning

1. Show how Nu-Link2-Pro can use ICP Programming Tool on PC to program target chips online 2. Show how Nu-Link2-Pro drag and drop files to the NuMicro MCU drive to program the target chip online - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning

1. Explain how to use ICP Programming Tool to update Nu-Link2-Pro's firmware. 2. Explain how to update the Nu-Link2-Pro's firmware by pressing the trigger button before power is on. Then the power is on and dragging files to the Nu-Link2 drive. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning

展示如何使用ICP Programming Tool 產生燒錄檔案，並使用PC 將韌體存放至USB/SD 儲存裝置後，將此USB/SD 儲存裝置插入Nu-Link2-Pro，接著連接目標晶片後，按下觸發按鈕完成離線燒錄。 #zh-Hant #Tool #Training #Intermediate #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/nu-link2-pro 聯絡我們：SalesSupport@nuvoton.com

1. 展示 Nu-Link2-Pro 如何在 PC 上搭配 ICP Programming Tool 來線上燒錄目標晶片。 2. 展示 Nu-Link2-Pro 如何拖拉檔案至 NuMicro MCU 磁碟機的方式來進行線上燒錄目標晶片。 #zh-Hant #Tool #Training #Intermediate #Learning - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/nu-link2-pro 聯絡我們：SalesSupport@nuvoton.com

介紹與說明 Nuvoton NuMicro ML56 電容式觸控按鍵防水與抗干擾。 哈囉大家好! 我是新唐 FAE Tim，今天為大家做 ML56 觸控按鍵防水與抗干擾介紹。 首先介紹 ML56 觸控按鍵防水與抗干擾的能力。 良好的防水能力，在 2 mm 深度的積水下觸控按鍵動作仍正常。 通過 IEC 61000-4-6 10 V 動態注入電流測試。 接著要說明 ML56 觸控按鍵的相關參數設定，先說明觸控靈敏度。 #Pulse Width (觸控按鍵感測脈衝寬度時間控制） 可以透過適當設定脈衝寬度來調整觸控按鍵的靈敏度，較短的脈衝寬度設定會帶來較差的靈敏度和較低的功耗，反之亦然。 接著說明觸控性能的穩定性之 1 #Times (觸控按鍵感測次數控制) 可以透過適當地設置 “次數” 來調整觸控按鍵原始數據的穩定性，“次數” 設置越短，原始數據的穩定性越差，功耗也越低，反之亦然。 觸控性能的穩定性之 2 #IIR (IIR 濾波器) IIR 濾波器可以控制當前原始數據與上一個原始數據的比率。 用戶可以啟用 IIR 濾波器以抗干擾。啟用 IIR 濾波器時，它將增加觸控響應時間。 觸控性能的穩定性之 3 #Debounce (觸控按鍵去抖動) 可以透過適當地設置去抖動，觸控按鍵進入 (開) 和釋放 (關) 偵測的去抖動次數來調整觸控按鍵的穩定性，較短的去抖動設置會帶來更快的觸控響應時間，反之亦然。 觸控性能的穩定性之 4 #Trace Baseline (基準線是透過 “校正” 所產生的) 觸控按鍵自動環境補償是一種演算法，該演算法可在啟動運作時自動追蹤基準線做環境變化補償，使觸控按鍵性能更加穩定。綜合上述的參數說明，以下為大家介紹防水與抗干擾的參數設定。 首先是 #防水參數設定。 良好的防水能力，在 2 mm 深度的積水下觸控按鍵動作仍正常。 觸控按鍵系統參數如表所示： Pulse Width = 500 ns Times = 128 接著是 #抗干擾性參數設定 通過 IEC 61000-4-6 10 V 動態注入電流測試。 觸控按鍵系統參數如表所示： Pulse Width = 2 us Times = 128 IIR New = 6, Old = 2 Debounce Entry = 1, Release = 1 接著我們使用 ML56 NuMaker Board 來為大家做實際操作展示 #觸控按鍵防水功能。手指先沾水，然後去觸摸觸控按鍵，反覆以上動作，可以看到觸控按鍵依舊正常動作，不受影響。 最後我們使用 ML56 NuMaker Board 來為大家做實際操作展示 #觸控按鍵抗干擾能力。先打開對講機，然後近距離干擾觸控按鍵，可以看到觸控按鍵依舊正常動作，不受影響。 以上是這次的教學影片, 謝謝大家! 如果您有任何問題，歡迎聯絡我們。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/low-power-8051-series/ 聯絡我們： SalesSupport@nuvoton.com #Product #Learning #Basic #zh-Hant

Introduce the waterproof and noise immunity of ML56 touch key. Hello! Everyone! I am Nuvoton FAE Tim. Today, I will show you the waterproof and noise immunity of ML56 touch key. First introduce the waterproof and noise immunity of ML56 touch key. Good waterproof function, support finger touch with 2 mm depth water droplet. IEC 61000-4-6 conducted noise immunity (CNI) with 10 Vrms noise voltage. Next, we will explain the related parameter settings of the ML56 touch key, and first explain the touch sensitivity. #Pulse Width (Touch key sensing pulse width time control) Touch key sensitivity can be adjusted by setting Pulse Width properly, shorter Pulse Width setting comes with poor sensitivity and less power-consumption, vice versa. Then explain the stability of touch performance, Part 1. #Times (Touch key sensing times control) Touch key raw data stability can be adjusted by setting Times properly, shorter Times setting comes with poor raw data stability and less power-consumption, vice versa. Stability of touch performance, Part 2. #IIR (IIR filter) IIR filter can control the ratio of current raw data and previous one. User can enable IIR Filter to be against noise. It will increase the touch response time when enables IIR Filter. Stability of touch performance, Part 3. #Debounce (Touch key debounce) Touch key stability can be adjusted by setting Debounce properly, the debounce times for touch key entry (on) and release (off) detection, shorter Debounce setting comes with faster touch response time, vice versa. Stability of touch performance, Part 4. #Trace Baseline (Baseline is generated by “Calibration”) Touch key auto environment compensation is an algorithm that baseline tracking each touch key automatically at power-up and keeps compensating environment variation affects touch key performance during runtime. Based on the above parameter description, the following introduces the waterproof and noise immunity parameter settings. The first is waterproof parameter setting. Good waterproof function, support finger touch with 2 mm depth water droplet. Touch key system parameters are shown in the table Pulse Width = 500 ns Times = 128 Next is the noise immunity parameter setting IEC 61000-4-6 conducted noise immunity (CNI) with 10 Vrms noise voltage. Touch key system parameters are shown in the table. Pulse Width = 2 us Times = 128 IIR New = 6, Old = 2 Debounce Entry = 1, Release = 1 Then we use the ML56 NuMaker Board to show you the waterproof function of the touch key. Dip the finger in water first, and then touch the touch key. Repeat the above actions, we can see that the touch key still works normally and is not affected. Finally, we use the ML56 NuMaker Board to show you the noise immunity ability of the touch key. Turn on the walkie-talkie first, and then interfere with the touch key at close range, we can see that the touch key still operate normally and is not affected. That's all for today's video, thank you everyone! If you have any questions, please contact us. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.comon.com #Product #Learning #Basic #en

Nuvoton provides a development tool for capacitive Touch Sensors. The best feature of the calibration tool is that it uses the GUI to configure and tune your design automatically. Besides, the tool can export the configuration parameters and import them to another. Not only can greatly shorten the development time of developers, but also shorten the time for mass production. This video will introduce how to use this development tool and the definition of parameter. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.comon.com #Product #Learning #Basic #en

Hello! Everyone! I am Nuvoton FAE Tim. Today, I will show you ML56 Capacitive Touch Key PCB Design. First introduce the Touch Sensor Channel Selection. Touch Sensor Channels. ML56 series supports up to 14 touch sensor channels. #Reference Sensor It is recommended to select one reference sensor at touch sensor channel TK7 or TK14. Maximize the distance between the reference sensor and other signals to minimize crosstalk. #Shield Electrodes Put the shield electrode around the touch sensor to get better signal quality and waterproof capability. Recommended to select shield channel at touch TK0, TK4 or clock out pins (P3.2 / P4.6 / P5.7). Next, we will explain the PCB Layout Rules. #Touch Key Shapes Recommended to have a 10 x 10 mm sensor area for good touch key sensitivity. Larger touch sensor electrode work better for thicker cover. #Reference Sensor Recommended to assign the reference key at touch channel TK7 or TK14. Maximize the distance to other signals to minimize crosstalk. Round shape electrode with 1 mm diameter size is enough for normal case. #Ground Plane It is recommended that the traces of the touch key have a good hatched ground plane surround. It is recommended to have hatched ground plane under the touch keys. Hatched ground plane with 6 mil trace and 50 mil grid. #Shield Electrode Put touch keys with shield electrode around which provides the same phase signal around touch keys. Hatched shield electrode with 6 mil trace and 50 mil grid. Shield electrode area needs to keep filled around the touch key in greater than 10 mm width. Finally, explain the Touch Key Cover Thickness. As the cover thickness increases, the touch key sensitivities will decrease. Larger touch key size work better for thicker cover. Recommended touch key diameter size with difference acrylic cover thickness as shown in the table. That's all for today's video, thank you everyone! If you have any questions, please contact us. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.comon.com #Product #Learning #Basic #en

Hello! Everyone! I am Nuvoton FAE Tim. Today, I will show you ML56 Capacitive Touch Key Technology. First introduce the Capacitive Touch Key Fundamentals. The capacitance of the sensor without a finger touch is called as “parasitic capacitance”, CP. Parasitic capacitance results from the electric field between the sensor (including the sensor pad and traces) and other conductors in the system such as the ground planes, traces, any metal in the product’s chassis or enclosure, etc. The capacitance between the sensor pad and the finger is CF. The total capacitance CT of the sensor is the sum of CP and CF. Next, we will explain the ML56 Capacitive Touch Key Sensing Method. ML56 implements two switching capacitor banks for injecting charges to CP (or CT) and CR. CR is the parasitic capacitance of reference channel. After touch key calibration, CP and CR are balanced with CB and CCB (comparator output is “low”). Touch the sensing touch key which makes CT = CP + CF Now the negative input terminal voltage of the comparator is lower than positive side and comparator output is “high”. ML56 touch key controller will increase CCB to CCB’ to balance CT and CR again (comparator output is “low”). A finger touch can be detected by checking the difference of CCB and CCB’. By comparing the CCB’ shift level from CCB, the steady state to a predetermined threshold, the algorithm can determine whether the touch key is in ON (Touch) or OFF (No Touch) state. That's all for today's video, thank you everyone! If you have any questions, please contact us. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/low-power-8051-series/ Contact us: SalesSupport@nuvoton.comon.com #Product #Learning #Basic #en